essmi-concluckoi {pioduaki, 20 stern ave springfield, new jersey 07081 u.s.a. telephone: (973) 376-2922 (212) 227-6005 fax: (973) 376-8960 icte5.0 to icte15c mpte-5 to mpte-45 1n6373to 1n6381 and 1n6382to 1n6389 glass passivated junction transient voltage suppressor standoff voltage- 5.0 to 45.0v 1500 watt peak power features > plastic package has underwriters laboratory flammability classification 94 v-o ? glass passivated chip junction in molded plastic package > 1500w surge capability at 1ms > excellent clamping capability > lowzener inpedance > fast response time: typically less than 1.0 ps from 0 volts to bv min. ? typical ir less than 1ua above 10v > high temperature soldering guaranteed: 250c/10 seconds/ .375", (9.5mm) lead length, slbs., (2.3kg) tension > includes 1n6373 thru 1n6385 mechanical data case: jedec do-201 molded plastic terminals: plated axial leads, solderable per mil-std-750, method 2026 polarity: color band denoted positive end (cathode) except bipolar mounting position: any weight: 0.045 ounces, 1.2 grams do-201 0.210(3.3 ttsoft cm. i.o (35.4) min 0.285(7.2) t i dimensions in inches and (millimeters) maximum ratings and characteristics ratings at 25c ambient temperature unless otherwise specified. rating peak pulse power dissipation at ta = 25 c, tp = 1ms (note 1) peak pulse current of on 10/1000 us waveform (note 1) steady state power dissipation at tl = 75c lead lengths .375", 9.5mm (note 2) peak forward surge current, 8.3ms single half sine-wave superimposed on rated load, (jedec method)(note 3) maximum instantaneous forward voltage at 100a for unidirectional only operatings and storage temperature range symbol pppm ippm pm(av) ifsm vf tj, tstg value minimum 1500 see table 1 5.0 200 3.5 -55+175 units watts amps watts amps volt c nj semi-conductors reserves the right to change test conditions, parameter limits and package dimensions without notice, fnformation furnished by n.( semi-conductors is believed to be both accurate and reliable at the time of going to press. however, nj seini-conductors assumes no responsibilily for any errors or omissions discovered in its use. ni semi-conductors encourages customers to verify that datasheets are current before placing orders.
icte5.0 tou icte15c mpte-5 to mpte-45 1n6373 to 1n6381 and 1n6382 to 1n6389 glass passivated junction transient voltage suppressor standoff voltage- 5.0 to 45.0v 1500 watt peak power part numbers icte-5* icte-8 icte-10 icte-12 icte-15 icte-18 icte-22 icte-36 icte-45 1n6373 1n6374 1 n6375 1n6376 1 n6377 1 n6378 1n6379 1N6380 1n6381 mpte-5* mpte-8 mpte-10 mpte-12 mpte-18 mpte-18 mpte-22 mpte-36 mpte-45 reverse standoff voltage (vrwm) (v) 5* 8.0 10.0 12.0 15.0 18.0 22.0 36.0 45.0 minimum breakdown voltage vbr@1ma (volts) 6.0 9.4 11.7 14.1 17.6 21.2 25.9 42.4 52.9 maximum reverse leakage ir@vr (ma) 300.0 25.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 maximum clamping voltage (vc)@ lpp=1a (volts) 7.1 11.3 13.7 16.1 20.1 24.2 29.8 50.6 63.3 maximum clamping voltage (vc) @ lpp=1a (volts) 7.5 11.5 14.1 16.5 20.6 25.2 32.0 54.3 70.0 maximum peak pulse current ipp (a) 160.0 100.0 90.0 70.0 60.0 50.0 40.0 23.0 19.0 icte-8c icte-10c icte-12c icte-15c icte-18c icte-22c icte-36c icte-45c 1n6382 1n6383 1 n6384 1n6385 1n6386 1n6387 1n6388 1n6389 mpte-8c mpte-10c mpte-12c mpte-15c mpte-18c mpte-22c mpte-36c mpte-45c 8.0 10.0 12.0 15.0 18.0 22.0 36.0 45.0 9.4 11.7 14.1 17.6 21.2 25.9 42.4 52.9 50 2.0 2.0 2.0 2.0 2.0 2.0 2.0 11.4 14.1 16.7 20.8 24.8 30.8 50.6 63.3 11.6 14.5 17.1 21.4 25.5 32.0 54.3 70.0 100.0 90.0 70.0 60.0 50.0 40.0 23.0 19.0 "icte-5 is not available in bi-directional. suffix 'c' denotes bi-directional device.
|
